Reassembly

LIGHTING: HEADLIGHT ASSEMBLY: REASSEMBLY

1. INSTALL HEADLIGHT SWIVEL MOTOR (for HID Headlight)

(a) Install the headlight swivel motor with the 3 screws.





(b) Connect the connector.

2. INSTALL HEADLIGHT GASKET (for HID Headlight)

(a) Install a new headlight gasket.

3. INSTALL LIGHT CONTROL ECU SUB-ASSEMBLY (for HID Headlight)

(a) Connect the connector.

(b) Install the headlight control ECU sub-assembly with the 4 screws.





4. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING (for HID Headlight)

(a) Install a new headlight leveling motor base packing.

5. INSTALL HEADLIGHT LEVELING MOTOR (for HID Headlight)

(a) Engage the tip of the headlight leveling motor with the reflector.





(b) Turn the headlight leveling motor to install it.





6. INSTALL FRONT TURN SIGNAL LIGHT BULB

(a) Install the front turn signal light bulb to the front turn signal light socket.

(b) Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow and install them as a unit.





7. INSTALL FRONT SIDE MARKER LIGHT BULB

(a) Install the front side marker light bulb to the front side marker light socket.

(b) Turn the front side marker light bulb and front side marker light socket in the direction indicated by the arrow and install them as a unit.





8. INSTALL DISCHARGE HEADLIGHT BULB (for HID Headlight)

(a) Lock the set spring to install the discharge headlight bulb as shown in the illustration.





NOTICE:
Do not touch the bulb glass.

(b) Turn the socket of the light control ECU sub-assembly in the direction indicated by the arrow to connect the socket.





9. INSTALL HEADLIGHT SOCKET COVER (for HID Headlight)

(a) Install the headlight socket cover as shown in the illustration.





10. INSTALL NO. 1 HEADLIGHT BULB (for Halogen Headlight)

(a) Install the No. 1 headlight bulb as shown in the illustration.





NOTICE:
Do not touch the bulb glass.

11. INSTALL NO. 2 HEADLIGHT BULB

(a) Install the No. 2 headlight bulb as shown in the illustration.





NOTICE:
Do not touch the bulb glass.

12. INSTALL FRONT BUMPER SIDE SUPPORT

(a) Install the front bumper side support with the 3 screws.