Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Engage the clip and install the rear combination light assembly with the screw and 3 nuts.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(b) Connect the connector and clamp.





2. INSTALL REAR BUMPER ASSEMBLY (w/o Intuitive Parking Assist System) Installation

3. INSTALL REAR BUMPER ASSEMBLY (w/ Intuitive Parking Assist System) Installation

4. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Intuitive Parking Assist System) Reassembly

5. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH Reassembly

6. INSTALL REAR FLOOR FINISH PLATE Reassembly

7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Reassembly

8. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY Reassembly

9. INSTALL SPARE WHEEL COVER TRAY

10. INSTALL NO. 2 SPARE WHEEL COVER

11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

12. INSTALL REAR LIGHT ASSEMBLY

(a) Install the rear light assembly with the 4 nuts.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(b) Connect the connector and clamp.

13. INSTALL LUGGAGE COMPARTMENT DOOR COVER

14. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE

15. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE

16. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP