Door Mirror Foot Light Circuit

LIGHTING: LIGHTING SYSTEM: Door Mirror Foot Light Circuit
- Door Mirror Foot Light Circuit

DESCRIPTION

The door mirror foot light is controlled by the mirror ECU. The operation and condition of this control are described below.





WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY (DOOR MIRROR FOOT LIGHT)

HINT
Door Mirror Foot Light.

NG -- REPLACE OUTER REAR VIEW MIRROR ASSEMBLY
OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (OUTER REAR VIEW MIRROR - ECU AND BODY GROUND)

(a) Disconnect the E65 outer mirror control ECU connector.





(b) Disconnect the I3 or H4 outer rear view mirror connector.

(c) Measure the resistance according to the value(s) in the table.

Standard resistance:

LH Side
RH Side










NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE