Installation

2GR-FE ENGINE CONTROL SYSTEM: CAMSHAFT OIL CONTROL VALVE: INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Exhaust Side)

(a) Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.





(b) Install the camshaft timing oil control valve with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
Make sure that the O-ring is not cracked or jammed when installing the oil control valve.

(c) Connect the camshaft timing oil control valve connector.

2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Intake Side)

(a) Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.





(b) Install the camshaft timing oil control valve with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
Make sure that the O-ring is not cracked or jammed when installing the oil control valve.

(c) Connect the camshaft timing oil control valve connector.

3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Exhaust Side)

(a) Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.





(b) Install the camshaft timing oil control valve with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
Make sure that the O-ring is not cracked or jammed when installing the oil control valve.

(c) Connect the camshaft timing oil control valve connector.

4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Intake Side)

(a) Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.





(b) Install the camshaft timing oil control valve with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
Make sure that the O-ring is not cracked or jammed when installing the oil control valve.

(c) Connect the camshaft timing oil control valve connector.

5. INSTALL INTAKE AIR SURGE TANK Installation

6. INSTALL NO. 1 AIR CLEANER INLET Installation

7. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

8. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

9. INSTALL AIR CLEANER INLET ASSEMBLY Installation

10. INSTALL FRONT SUSPENSION UPPER CENTER BRACE Installation

11. ADD ENGINE COOLANT Testing and Inspection

12. CHECK FOR ENGINE COOLANT LEAKS Testing and Inspection

13. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

14. INSTALL ENGINE ROOM SIDE COVER LH Installation

15. INSTALL ENGINE ROOM SIDE COVER RH Installation

16. INSTALL COOL AIR INTAKE DUCT SEAL Installation

17. INSTALL ENGINE UNDER COVER RH

18. INSTALL ENGINE UNDER COVER LH