Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE FRONT DOOR SCUFF PLATE Removal

4. REMOVE REAR DOOR SCUFF PLATE Removal

5. REMOVE LOWER CENTER PILLAR GARNISH Removal

6. REMOVE SIDE AIRBAG SENSOR

(a) Remove the nut and separate the side airbag sensor from the body.





(b) Disconnect the side airbag sensor connector and remove it.

NOTICE:
When handling the sensor connector, take care not to damage the wire harness.