Operation CHARM: Car repair manuals for everyone.

Cruise Control System





CRUISE CONTROL: CRUISE CONTROL SYSTEM: P0575: Cruise Control Input Circuit
P0575 - Cruise Control Input Circuit

DESCRIPTION

This DTC indicates the internal abnormalities of the hybrid vehicle control ECU.





HINT
The hybrid vehicle control ECU receives signals from each sensor to control all functions of the cruise control system. When a trouble code is detected, the fail-safe function activates and remains on until the power switch is turned off.

INSPECTION PROCEDURE

PROCEDURE

1. READ OUTPUT DTC (P0575)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Clear the DTC DTC Check / Clear.

(e) Perform the following to make sure that the DTC detection conditions are met.

HINT
If the detection conditions are not met, the malfunction cannot be detected.

(1) Drive the vehicle at a speed of 40 km/h (25 mph) or more.

(2) Turn the cruise control main switch (ON-OFF button) on.

(3) Push the -SET switch to activate the cruise control.

(f) Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

(g) Read the DTCs.

Result:





B -- REPLACE HYBRID VEHICLE CONTROL ECU Removal

A -- USE SIMULATION METHOD TO CHECK Electronic Circuit Inspection Procedure