Smart Access System With Push-Button Start (for Start Function)

THEFT DETERRENT / KEYLESS ENTRY: SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function): PRECAUTION

1. WHEN DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

(a) The power source mode (off, on (ACC), on (IG)) is always retained in memory by the vehicle. If the auxiliary battery is disconnected, the power source mode that was present before disconnection will be restored after the auxiliary battery is reconnected. Be sure to turn the power switch off (change the power source mode to off) before disconnecting the cable from the negative (-) auxiliary battery terminal. Be careful if the power source mode of a vehicle with a discharged auxiliary battery is not known.

(b) After the cable is reconnected to the negative (-) auxiliary battery terminal, the hybrid control system may not start on the first attempt. This is not a malfunction. The hybrid control system will start normally for subsequent attempts.

HINT
In this chapter, the expression "power source" has been used in some locations to allow precise explanations. The power source mode is also expressed using conventional expressions such as "power switch off", "power switch on (ACC)" and "power switch on (IG)".

2. PRECAUTIONS FOR PUSH-BUTTON START FUNCTION

(a) Before starting hybrid control system, firmly depress the brake pedal until the indicator in the power switch turns green.

(b) The smart access system with push-button start, wireless door lock control system and engine immobiliser system may not operate normally, or the size of the operation area may decrease in the following situations:

(1) When the smart key battery is depleted.

(2) When any facility that generates strong radio waves or electrical noise such as a TV tower, power plant, gas station, broadcast station, large video-billboard or airport are located near the inspection site.

(3) When the key is located near a wireless device such as a radio, cellular phone or cordless telephone.

(4) When the smart key is in contact with or covered with a metal object similar to the following:

* Metal or aluminum plated card

* Aluminum film from a cigarette box

* Metallic wallet or bag

* Coins

* Heating pad

* Media such as CDs or DVDs

(5) When a wireless remote is operated near the vehicle.

(6) When the key is carried with following items:

* Electronic key or wireless remote from another vehicle

* PC or similar handheld device

* Digital audio player

* Portable game device

(7) When a metallic film is applied to the rear glass.

3. WHEN KEY BATTERY IS LOW

(a) When the key battery is depleted, the hybrid control system cannot be started using the smart function. For how to start the hybrid control system when the key battery is depleted, see Description System Description.

(b) If the electrical key is held near the power switch to start the hybrid control system when the electrical key battery is depleted, the following warnings will sound:

(1) Driver door open -> closed

* An exit warning will sound if a shift state other than park (P) has been selected and the power source (power switch) is in a mode other than off.

* An exit warning will sound if park (P) has been selected and the power source has been in a mode other than off.

(2) Doors other than the driver door open -> closed

* A warning will sound to indicate that the electrical key has been taken out of the vehicle.

These warnings will sound because it is not possible for the vehicle to determine if the key is present in the vehicle (due to the depleted key battery). These warnings do not indicate system malfunctions.

4. EMERGENCY HYBRID CONTROL SYSTEM STOP CONTROL

(a) If it is necessary to stop the hybrid control system in an emergency while driving the vehicle, push and hold the power switch for more than 3 seconds.

While driving, the power switch should only be operated in the event of an emergency.

NOTICE:
If the hybrid control system stops while the vehicle is being driven, this could lead to an accident.

5. EMERGENCY HYBRID CONTROL SYSTEM START CONTROL

(a) If there is a malfunction in the stop light switch or STOP fuse, their signals may not be correctly transmitted to the power management control ECU. This may result in the hybrid control system not starting even if the power switch is pressed with the brake pedal depressed and park (P) selected.

To activate the hybrid control system:

(1) Depress the parking brake pedal.

(2) Turn the power switch from off to on (ACC).

(3) Depress the brake pedal.

(4) Press and hold the power switch for 15 seconds or more.