Power Mirror Control System (w/o Memory)

MIRROR (EXT): POWER MIRROR CONTROL SYSTEM (w/o Memory): TERMINALS OF ECU

1. CHECK A/C AMPLIFIER ASSEMBLY

(a) Disconnect the F47 A/C amplifier assembly connector.





(b) Measure the voltage and resistance according to the value(s) in the table below.

HINT
Measure the values on the wire harness side with the connector disconnected.





If the result is not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the F47 A/C amplifier assembly connector.

(d) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, the A/C amplifier assembly may have a malfunction.

2. INTEGRATION CONTROL & PANEL ASSEMBLY

(a) Disconnect the F57*1 or F59*2 A/C control panel assembly connector.





Text in Illustration





(b) Measure the voltage and resistance according to the value(s) in the table below.

HINT
Measure the values on the wire harness side with the connector disconnected.





If the result is not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the F57*1 or F59*2 A/C control panel assembly connector.

(d) Check for pulses according to the value(s) in the table below.





* *1: w/ Navigation System

* *2: w/o Navigation System

If the result is not as specified, the A/C control panel assembly may have a malfunction.