Reassembly

LIGHTING (EXT): HEADLIGHT ASSEMBLY (for LED Headlight): REASSEMBLY

1. INSTALL HEADLIGHT PROTECTOR

(a) Remove the double-sided tape from the headlight assembly.

(b) Wipe off any tape adhesive residue with cleaner.

(c) Using double-sided tape, install a new headlight protector to the area indicated in the illustration.





Text in Illustration





2. INSTALL FRONT BUMPER BRACKET

(a) Engage the guide.





(b) Install the front bumper bracket with the 2 screws.

3. INSTALL HEADLIGHT CORD

(a) Engage the 2 clamps and claw, and install the headlight cord.





4. INSTALL HEADLIGHT REFLECTOR

(a) Install the headlight reflector with the 3 screws.





(b) Connect the connector.

5. INSTALL HEADLIGHT GASKET

(a) Install a new headlight gasket.

6. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY

(a) Connect the 2 connectors.





(b) Install the headlight light control ECU sub-assembly with the 4 screws.





7. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING

(a) Install a new headlight leveling motor base packing.

8. INSTALL HEADLIGHT LEVELING MOTOR

(a) Engage the tip of the headlight leveling motor with the reflector as shown in the illustration.





(b) Turn the headlight leveling motor in the direction indicated by the arrow shown in the illustration to install it.





HINT
For the headlight leveling motor RH, rotate it symmetrical to the directional arrow shown in the illustration.

(c) Connect the connector.

9. INSTALL CLEARANCE LIGHT BULB

(a) Install the clearance light bulb to the headlight cord.

(b) Turn the clearance light bulb and headlight cord in the direction indicated by the arrow shown in the illustration and install them as a unit.





10. INSTALL FRONT TURN SIGNAL LIGHT BULB

(a) Install the front turn signal light bulb to the headlight cord.

(b) Turn the front turn signal light bulb and headlight cord in the direction indicated by the arrow shown in the illustration and install them as a unit.





11. INSTALL FRONT SIDE MARKER LIGHT BULB

(a) Install the front side marker light bulb to the headlight cord.

(b) Turn the front side marker light bulb and headlight cord in the direction indicated by the arrow shown in the illustration and install them as a unit.





12. INSTALL NO. 1 HEADLIGHT BULB

(a) Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.





NOTICE:
Do not touch the bulb glass.

13. INSTALL NO. 1 HEADLIGHT BACK COVER

(a) Connect the connector.

(b) Turn the No. 1 headlight back cover in the direction indicated by the arrow shown in the illustration to install it.