Installation

LIGHTING (EXT): HEADLIGHT ASSEMBLY (for LED Headlight): INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect each connector.

(b) for LH Side:

(1) Engage the clamp.

(c) Install the headlight assembly with the bolt and 3 screws.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

2. INSTALL FRONT FENDER TOP REINFORCEMENT SUB-ASSEMBLY

(a) Engage the 4 clips to install the front fender top reinforcement sub-assembly.

3. INSTALL FRONT BUMPER ASSEMBLY

(a) Install the front bumper assembly Installation.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation

5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation

6. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT (for LED Headlight)

7. PREPARE FOR HEADLIGHT AIMING (Using a headlight aim test machine) (for LED Headlight)

8. PREPARE FOR HEADLIGHT AIMING (Using a screen) (for LED Headlight)

9. INSPECT HEADLIGHT AIMING (for LED Headlight)

10. ADJUST HEADLIGHT AIMING (for LED Headlight)