Installation

LIGHTING (INT): PERSONAL LIGHT: INSTALLATION

1. INSTALL MAP LIGHT BULB

(a) Install the 2 map light bulbs to the 2 map light sockets.

(b) Turn the 2 map light bulbs and 2 map light sockets in the direction indicated by the arrows in the illustration and install them as a unit.





2. INSTALL MAP LIGHT ASSEMBLY

(a) Connect the connector.

(b) Engage the 2 clips and 2 claws, and install the map light assembly.





(c) Install the 2 screws.

(d) w/ Holder:

(1) Rotate the 2 caps as shown in the illustration.





(2) Engage the 2 claws and install the 2 caps.





(3) Close the holder.

(e) w/o Holder:

(1) Engage the 4 claws and install the cover.





3. INSTALL FRONT ROOF TOP GARNISH (w/o Lane Keeping Assist System) Installation

4. INSTALL FRONT ROOF TOP GARNISH (w/ Lane Keeping Assist System) Installation

5. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Automatic High Beam System) Installation

6. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ Automatic High Beam System) Installation

7. INSTALL RAIN SENSOR COVER (w/ Rain Sensor) Installation