Disassembly

LIGHTING (EXT): REAR LIGHT ASSEMBLY: DISASSEMBLY

1. REMOVE BACK-UP LIGHT BULB

(a) Turn the back-up light bulb and rear light socket and wire in the direction indicated by the arrow shown in the illustration and remove them as a unit.





(b) Remove the back-up light bulb from the rear light socket and wire.

2. REMOVE REAR LIGHT SOCKET AND WIRE

(a) Disengage the clamp.





(b) Disconnect the connector and remove the rear light socket and wire.

3. REMOVE REAR LIGHT GASKET

(a) Remove the rear light gasket.





NOTICE:
* Be sure to remove all the traces of the old gasket from the body.
* Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.

4. REMOVE REAR COMBINATION LIGHT PROTECTOR

(a) Remove the 3 rear combination light protectors.





NOTICE:
* Be sure to remove all the traces of the old rear combination light protectors from the body.
* Do not reuse the removed rear combination light protectors. Be sure to install a new rear combination light protector to prevent water ingress.