Installation

2AZ-FXE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Apply a light coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.





Text in Illustration





NOTICE:
Do not twist the O-ring.

(b) Install the camshaft timing oil control valve assembly with the bolt.

Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

(c) Connect the camshaft timing oil control valve assembly connector.

2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

3. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

4. INSTALL COWL BODY MOUNTING REINFORCEMENT RH Installation

5. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL Installation

6. INSTALL WATER GUARD PLATE RH Installation

7. INSTALL FRONT WIPER MOTOR AND LINK

(a) Install the front wiper motor and link Installation.