Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RECEIVER

(a) Connect the connector to the tire pressure warning receiver.

(b) Engage the 2 tabs into the holes to temporarily install the tire pressure warning receiver.

(c) Install the bolt.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH Installation

3. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY LH

HINT
Refer to the instructions for Installation of the rear seat side airbag assembly LH Installation.

4. INSPECT TIRE PRESSURE WARNING SYSTEM

(a) Inspect the tire pressure warning system Test Mode Procedure.