Pinout Values and Diagnostic Parameters

SEAT BELT: SEAT BELT WARNING SYSTEM: TERMINALS OF ECU

1. CHECK COMBINATION METER ASSEMBLY

(a) Disconnect the F4 combination meter assembly connector.





(b) Measure the resistance according to the value(s) in the table below.

HINT
Measure the values on the wire harness side with the connector disconnected.





If the result is not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the F4 combination meter assembly connector.

(d) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, the combination meter assembly may have a malfunction.

2. CHECK TELLTALE LIGHT ASSEMBLY





(a) Measure the voltage according to the value(s) in the table below.





* If the result is not as specified, the telltale light assembly may have a malfunction.

3. CHECK CENTER AIRBAG SENSOR ASSEMBLY









4. OCCUPANT CLASSIFICATION ECU