Parking Assist Switch: Testing and Inspection

PARK ASSIST / MONITORING: WIDE VIEW FRONT MONITOR SWITCH: INSPECTION

1. INSPECT NO. 1 PATTERN SELECT SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Resistance:









Test in Illustration





(b) Check the illumination





(1) Connect a positive (+) lead to terminal 3(ILL+) and a negative (-) lead to terminal 6(ILL-) of the No. 1 pattern select switch assembly connector.

(2) Check that the switch illumination comes on.

OK:

No. 1 pattern select switch illumination comes on.

Test in Illustration