Installation

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: YAW RATE AND ACCELERATION SENSOR: INSTALLATION

1. INSTALL YAW RATE AND ACCELERATION SENSOR

(a) Connect the yaw rate and acceleration sensor connector to the yaw rate and acceleration sensor.





NOTICE:
Make sure that the yaw rate and acceleration sensor connector is connected securely.

(b) Install the yaw rate and acceleration sensor to the body with the 2 bolts.





Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

NOTICE:
* Do not damage the yaw rate and acceleration sensor.
* Make sure that the yaw rate and acceleration sensor is installed securely.
* Do not use dropped or damaged parts.
* Keep the contact surfaces of the yaw rate and acceleration sensor and the body free of foreign matter.
* Make sure that the yaw rate and acceleration sensor is facing the correct direction.

2. INSTALL COOLER BLOWER ASSEMBLY (for Rear Side)

HINT
Refer to the procedure from Install Cooler Blower Assembly Installation.

3. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION

(a) Perform the yaw rate and acceleration sensor zero point calibration Calibration.