Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: YAW RATE AND ACCELERATION SENSOR: REMOVAL

NOTICE:
While the battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch is turned on. Therefore, when servicing the brake system components, do not depress the brake pedal or open/close the doors while the battery is connected.

1. REMOVE COOLER BLOWER ASSEMBLY (for Rear Side)

HINT
Refer to the procedure up to Remove Cooler Blower Assembly Removal.

2. REMOVE YAW RATE AND ACCELERATION SENSOR

(a) Remove the 2 bolts and yaw rate and acceleration sensor from the body.





(b) Disconnect the yaw rate and acceleration sensor connector from the yaw rate and acceleration sensor.