Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: REMOVAL

NOTICE:
While the battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch is turned on. Therefore, when servicing the brake system components, do not depress the brake pedal or open/ close the doors while the battery is connected.

1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

2. PRECAUTION (w/ Navigation System)

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

4. REMOVE FRONT DOOR SCUFF PLATE LH Removal

5. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal

6. REMOVE INSTRUMENT SIDE PANEL LH Removal

7. REMOVE COWL SIDE TRIM BOARD LH Removal

8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL Removal

9. REMOVE NO. 1 SWITCH HOLE BASE Removal

10. REMOVE VSC OFF SWITCH

(a) Disengage the 2 claws and remove the VSC OFF switch.