Installation

STEERING COLUMN: TILT AND TELESCOPIC MANUAL SWITCH: INSTALLATION

1. INSTALL TILT AND TELESCOPIC SWITCH

(a) Engage the claw to install the tilt and telescopic switch.

(b) Connect the connector.

2. INSTALL LOWER STEERING COLUMN COVER Installation

3. INSTALL LOWER NO. 2 STEERING COLUMN COVER Installation

4. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY Installation

5. INSTALL STEERING WHEEL ASSEMBLY Installation

6. INSTALL STEERING PAD

HINT
Refer to the instructions for Installation of the steering pad Installation.