Installation
INTERIOR PANELS / TRIM: REAR SUNSHADE ASSEMBLY: INSTALLATION
1. INSTALL REAR SUNSHADE RELAY
NOTICE:
When reassembling the rear sunshade assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
(a) Install the rear sunshade relay with the 2 screws.
(b) Connect the connector.
(c) Install the rear sunshade relay cover with the 8 screws.
(d) Connect the link with the 2 screws.
2. INSTALL REAR WINDOW SHADE ASSEMBLY
(a) Install the rear window shade assembly, and temporarily tighten the 4 bolts [A] and bolt [B].
(b) Fully tighten the 5 bolts.
(c) Connect the connector.
3. INSTALL NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY
(a) Engage the 5 guides and 3 clips, and install the No. 2 package tray trim panel assembly.
4. INSTALL CENTER STOP LIGHT SET Installation
5. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
(a) Thread the 3 rear seat belt floor anchors into the package tray trim panel assembly.
(b) Insert the rear end of the package tray trim panel assembly into the rear window shade assembly.
(c) Engage the 3 clips to install the package tray trim panel assembly.
6. INSTALL REAR SEAT SHOULDER BELT COVER Installation
7. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH Installation
8. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Installation
9. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Installation
10. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH Installation
11. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH Installation
12. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY LH Installation
13. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY RH Installation
14. INSTALL REAR DOOR SCUFF PLATE LH Installation
15. INSTALL REAR DOOR SCUFF PLATE RH Installation
16. INSTALL REAR SEATBACK ASSEMBLY Installation
17. INSTALL REAR SEAT HEADREST ASSEMBLY RH Installation
18. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY Installation
19. INSTALL REAR SEAT HEADREST ASSEMBLY LH Installation
20. INSTALL REAR SEAT CUSHION LOCK HOOK Installation
21. INSTALL REAR SEAT CUSHION ASSEMBLY Installation
22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation
23. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation
24. PERFORM DIAGNOSTIC SYSTEM CHECK
(a) Perform a diagnostic system check Reading and Clearing Diagnostic Trouble Codes.
25. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.