Removal

SUSPENSION: REAR STABILIZER BAR: REMOVAL

1. REMOVE REAR WHEEL

2. REMOVE REAR STABILIZER LINK ASSEMBLY LH

(a) Remove the nut (A), and separate the rear stabilizer link assembly LH from the rear stabilizer bar.





NOTICE:
Be sure to hold the stud bolt using a hexagon wrench 6 mm in order to prevent the bolt from turning.

(b) Remove the bolt, nut (B), and the stabilizer link assembly LH.

3. REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

4. REMOVE REAR STABILIZER BAR SUB-ASSEMBLY (for Integrated Stabilizer Bracket Type)

(a) Remove the 4 bolts and the rear stabilizer bar sub-assembly.





HINT
The stabilizer bracket and bushing are built onto the stabilizer bar. If the bracket and/or bushing detach from the bar, replace the bar.

5. REMOVE REAR STABILIZER BAR (for Separate Stabilizer Bracket Type)

(a) Remove the 4 bolts, 2 stabilizer brackets, 2 rear stabilizer bushings, and rear stabilizer bar.