Part 3

SLIDING ROOF / CONVERTIBLE: METALTOP ROOF: REMOVAL - Continued

59. REMOVE SPARE WHEEL COVER TRAY ASSEMBLY (w/o Spare Tire)

(a) Remove the spare wheel cover tray assembly.





60. REMOVE DECK SIDE TRIM BOX LH

(a) Disengage the clip.





(b) Disconnect the connector and remove the deck side trim box LH.

61. REMOVE DECK SIDE TRIM BOX RH

(a) Disengage the clip.





(b) Disconnect the connector and remove the deck side trim box RH.

62. REMOVE LUGGAGE DOOR LOCK PROTECTOR

(a) Disengage the left and right claws to remove the luggage door lock protector.





63. REMOVE ROPE HOOK ASSEMBLY (for Rear Side)

(a) Using a screwdriver, disengage the 2 claws.

HINT
Tape the screwdriver tip before use.





Text in Illustration





(b) Remove the 2 bolts and 2 rope hook assemblies.

64. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER

(a) Using a clip remover, disengage the 5 clips





(b) Disengage the 4 clips and remove the rear luggage compartment trim cover by pulling it upward.





65. REMOVE TONNEAU COVER ASSEMBLY

(a) Using a screwdriver, disengage the 2 claws.

HINT
Tape the screwdriver tip before use.





Text in Illustration





(b) Remove the 2 bolts and tonneau cover assembly.

66. REMOVE TONNEAU COVER HOOK HOLDER

(a) Turn each tonneau cover hook holder 45 degrees clockwise to remove the 2 tonneau cover hook holders.





67. REMOVE SLIDING ROOF GUIDE RAIL STOPPER

(a) Using a clip remover, remove the snap rings.





(b) Pull the 2 sliding roof guide rail stoppers forward to remove them.

68. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

(a) Using a clip remover, disengage the 4 clips and remove the front luggage compartment trim cover.





69. REMOVE LOWER INNER LUGGAGE COMPARTMENT TRIM COVER

(a) Using a clip remover, disengage the 3 clips and remove the lower inner luggage compartment trim cover.





70. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR CUSHION (for LH Side)

(a) Using a screwdriver, remove the snap ring and No. 2 luggage compartment door cushion.

HINT
Tape the screwdriver tip before use.





Text in Illustration





71. REMOVE TONNEAU COVER STOPPER SUB-ASSEMBLY LH

(a) Disengage the 3 claws and remove the tonneau cover stopper sub-assembly LH.





72. REMOVE PACKAGE TRAY TRIM SIDE COVER LH

(a) Remove the 2 bolts and screw.





(b) Disconnect the connector and remove the package tray trim side cover LH.

73. REMOVE LUGGAGE COMPARTMENT DOOR SIDE CUSHION RH (for LH Side)

(a) Using a clip remover, disengage the clip and remove the luggage compartment door side cushion RH.

HINT
Tape the clip remover tip before use.





Text in Illustration





74. REMOVE ROPE HOOK (for LH Side)

(a) Push in the left and right claws to remove the rope hook.





75. REMOVE ROPE HOOK ASSEMBLY (for Front LH)

(a) Using a screwdriver, disengage the 2 claws.

HINT
Tape the screwdriver trip before use.





Text in Illustration





(b) Remove the bolt and the rope hook assembly.

76. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

(a) Using a clip remover, disengage the 3 clips.





(b) Disengage the 2 clips and 2 claws and remove the luggage compartment trim cover LH.

77. REMOVE TONNEAU COVER STOPPER SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

78. REMOVE PACKAGE TRAY TRIM SIDE COVER RH

(a) Remove the 2 bolts and screw.





(b) Disconnect the 2 connectors and remove the package tray trim side cover RH.

79. REMOVE LUGGAGE COMPARTMENT DOOR SIDE CUSHION RH (for RH Side)

HINT
Use the same procedure for the RH side and LH side.

80. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR CUSHION (for RH Side)

HINT
Use the same procedure for the RH side and LH side.

81. REMOVE ROPE HOOK (for RH Side)

(a) Push in the left and right claws to remove the rope hook.





82. REMOVE ROPE HOOK ASSEMBLY (for Front RH)

(a) Using a screwdriver, disengage the 2 claws.

HINT
Tape the screwdriver tip before use.





Text in Illustration





(b) Remove the bolt and the rope hook assembly.

83. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH

(a) Using a clip remover, disengage the 3 clips.





(b) Disengage the 2 clips and 2 claws and remove the luggage compartment trim cover RH.

84. REMOVE REAR FLOOR FINISH SIDE PLATE LH

(a) Disengage the 3 claws, detach the drain hose and remove the rear floor finish side plate LH.





85. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

(a) Disengage the 2 clips and remove the luggage compartment trim cover LH.





86. REMOVE REAR FLOOR FINISH SIDE PLATE RH

HINT
Use the same procedure for the RH side and LH side.

87. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH

HINT
Use the same procedure for the RH side and LH side.