Replacement

RA62 MANUAL TRANSMISSION / TRANSAXLE: MANUAL TRANSMISSION OIL: REPLACEMENT

1. DRAIN MANUAL TRANSMISSION OIL

(a) Remove the manual transmission drain plug and gasket to drain the manual transmission oil.

(b) Install the manual transmission drain plug with a new gasket.

Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

2. ADD MANUAL TRANSMISSION OIL

(a) Remove the manual transmission filler plug and gasket.

(b) Add oil until the oil level is within 5 mm (0.197 in.) from the bottom of the manual transmission filler plug opening.

SST : 09961-01270

with SST - Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)

without SST - Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

NOTICE:
* The "with SST" torque value is effective when using SST with a fulcrum length of 200 mm (7.87 in.).
* The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 180 mm (7.09 in.).
* The "with SST" torque value is effective when SST is parallel to the torque wrench.
* When adding transmission oil, make sure that the vehicle is level.
* An excessively large or small amount of oil may cause problems.
* After adding oil, drive the vehicle and recheck the oil level.

3. INSPECT FOR OIL LEAK