Installation
4GR-FSE LUBRICATION: OIL LEVEL SENSOR: INSTALLATION
1. INSTALL ENGINE OIL LEVEL SENSOR
(a) Install a new gasket to the engine oil level sensor.
(b) Install the engine oil level sensor with the 4 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
HINT
Be sure to clean the contact surface.
(c) Connect the engine oil level sensor connector.
2. ADD ENGINE OIL Replacement
3. INSPECT FOR ENGINE OIL LEAK
4. CHECK ENGINE OIL LEVEL Testing and Inspection
5. INSTALL NO. 2 ENGINE UNDER COVER
6. INSTALL NO. 1 BODY MOUNTING BRACKET SUB-ASSEMBLY LH Installation
7. INSTALL NO. 1 BODY MOUNTING BRACKET SUB-ASSEMBLY RH Installation
8. INSTALL FRONT FLOOR COVER LH Installation
9. INSTALL FRONT FLOOR COVER RH Installation