Audio And Visual System (w/o Navigation System with Multi-display)

AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/o Navigation System with Multi-display): B15BB: Multi-media Interface ECU Malfunction
B15BB - Multi-media Interface ECU Malfunction

DESCRIPTION

This DTC is stored when a malfunction occurs in the multi-media interface ECU.





WIRING DIAGRAM





INSPECTION PROCEDURE

HINT
After the inspection is completed, clear the DTC.

PROCEDURE

1. REPLACE "iPod" OR USB DEVICE

(a) Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.

(b) Turn the engine switch off.

HINT
When this DTC has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.

(c) Turn the engine switch on (ACC).

(d) Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

HINT
* If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.

NEXT -- Continue to next step.

2. CLEAR DTC

(a) Clear the DTCs Audio And Visual System (w/o Navigation System with Multi-display).

NEXT -- Continue to next step.

3. RECHECK FOR DTC

(a) Recheck for DTCs and check if the same trouble occurs again.

OK:

No DTCs are output.

NG -- INSPECT MULTI-MEDIA INTERFACE ECU

OK -- USB DEVICE OR "iPod" WAS DEFECTIVE

4. INSPECT MULTI-MEDIA INTERFACE ECU

(a) Disconnect the No. 1 stereo jack adapter assembly connector.

(b) Measure the voltage according to the value(s) in the table below.





Standard Voltage:





Text in Illustration





NG -- CHECK HARNESS AND CONNECTOR (MULTI-MEDIA INTERFACE ECU - NO. 1 STEREO JACK ADAPTER ASSEMBLY)

OK -- REPLACE NO. 1 STEREO JACK ADAPTER ASSEMBLY Removal

5. CHECK HARNESS AND CONNECTOR (MULTI-MEDIA INTERFACE ECU - NO. 1 STEREO JACK ADAPTER ASSEMBLY)

(a) Disconnect the multi-media interface ECU connector.

(b) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- REPLACE MULTI-MEDIA INTERFACE ECU Removal