Reassembly

EXTERIOR PANELS / TRIM: REAR BUMPER: REASSEMBLY

1. INSTALL REAR UPPER BUMPER RETAINER LH

(a) Engage the claw and install the rear upper bumper retainer LH.





(b) Install the 2 screws.

2. INSTALL REAR UPPER BUMPER RETAINER RH

HINT
Use the same procedure for the RH side and LH side.

3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH

(a) Engage the 2 claws and install the No. 2 rear bumper side support LH.





(b) Install the 2 screws.

4. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH

HINT
Use the same procedure for the RH side and LH side.

5. INSTALL REAR BUMPER LOWER SIDE RETAINER LH

(a) Engage the claw and install the rear bumper lower side retainer LH





(b) Install the screw.

6. INSTALL REAR BUMPER LOWER SIDE RETAINER RH

HINT
Use the same procedure for the RH side and LH side.

7. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT LH

(a) Install the No. 1 rear bumper side support LH with the 2 screws and clip.





8. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT RH

HINT
Use the same procedure for the RH side and LH side.

9. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

(a) Engage the claw.





(b) Install the rear bumper reinforcement sub-assembly with the 8 bolts.





Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

10. INSTALL REAR BUMPER ARM REINFORCEMENT LH

(a) Engage the 3 guides and 4 claws, and install the rear bumper arm reinforcement LH.





11. INSTALL REAR BUMPER ARM REINFORCEMENT RH

HINT
Use the same procedure for the RH side and LH side.

12. INSTALL REAR BUMPER ENERGY ABSORBER

(a) Install the rear bumper energy absorber.





13. INSTALL REAR BUMPER PAD LH

(a) Wipe off any tape adhesive residue with cleaner.

(b) Install a new rear bumper pad LH.





Text in Illustration





HINT
Stick the new rear bumper pad LH on the line marked on the rear bumper assembly.

14. INSTALL REAR BUMPER PAD RH

HINT
Use the same procedure for the RH side and LH side.

15. INSTALL REAR BUMPER PROTECTOR LH

(a) Install the rear bumper protector LH.

16. INSTALL REAR BUMPER PROTECTOR RH

(a) Install the rear bumper protector RH.

17. INSTALL REAR BUMPER PIECE LH

(a) Engage the 2 claws and install the rear bumper piece LH.





18. INSTALL REAR BUMPER PIECE RH

HINT
Use the same procedure for the RH side and LH side.

19. INSTALL NO. 3 LUGGAGE ROOM WIRE (w/ Intuitive Parking Assist System)

(a) Engage the 2 clamps and install the No. 3 luggage room wire.





20. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

Installation

HINT
Use the same procedure for the RH side and LH side.

21. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Installation

HINT
Use the same procedure for the RH side and LH side.

22. INSTALL NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Installation

HINT
Use the same procedure for the RH side and LH side.

23. INSTALL REFLEX REFLECTOR ASSEMBLY LH

(a) Engage the guide and install the reflex reflector assembly LH.





(b) Install the screw.

24. INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.