Pinout Values and Diagnostic Parameters

DOOR / HATCH: FUEL LID OPENER SYSTEM: TERMINALS OF ECU

1. MAIN BODY ECU RH (COWL SIDE JUNCTION BLOCK RH)

(a) Disconnect the RD and RK junction block connectors.





(b) Measure the resistance and voltage according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the RD and RK junction block connectors.

(d) Measure the voltage according to the value(s) in the table below.





if the result is not as specified, the ECU may have a malfunction.