Operation CHARM: Car repair manuals for everyone.

Installation





SEAT: REAR SEAT ASSEMBLY: INSTALLATION

1. INSTALL REAR CONSOLE BOX ASSEMBLY

(a) When replacing the rear seat headrest cable with a new one:

(1) Install the rear seat lock control cable lock piece to rear seat headrest cable as shown in the illustration.





Text in Illustration





HINT
The rear seat lock control cable lock piece is supplied with the rear seat lock control cable. Therefore, cut the rear seat headrest cable to remove it and reuse the rear seat lock control cable lock piece.

(b) When replacing the rear seat lock control cable with a new one:

(1) The rear seat lock control cable lock piece cannot be removed from the rear seat headrest cable. Therefore, when replacing the rear seat control cable, replace the rear seat headrest cable and rear seat lock control cable together Reassembly.

(c) Insert the rear seat headrest cable with rear seat lock control cable lock piece to the connector case as shown in the illustration.





Text in Illustration





(d) Connect the rear seat lock control cable to rear seat lock control cable lock piece as shown in the illustration.





Text in Illustration





(e) Install the connector case as shown in the illustration.





Text in Illustration





(f) Connect the rear seat lock control cable cap to install the rear console box assembly as shown in the illustration.





Text in Illustration





(g) Engage the 2 cable hooks to the 2 rear seat headrest assemblies.





(h) Engage the 2 cable clamps to the rear seatback frame.





(i) Using hog ring pliers, install the rear seatback cover with 8 new hog rings.

NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

2. INSTALL REAR SEATBACK ASSEMBLY WITH REAR CONSOLE BOX ASSEMBLY

(a) Place the rear seatback assembly with rear console box assembly in the cabin.

NOTICE:
* When Installing the rear seatback assembly with rear console box assembly to the vehicle, make sure that there are two or more people available to support it.
* Be careful not to damage the vehicle body.

(b) Install the rear seatback assembly with rear console box assembly with the 4 bolts.





Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

(c) Engage the 3 hooks as shown in the illustration.





(d) Install the rear seatback assembly with the 4 bolts and 2 nuts.





Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

3. INSTALL REAR SEAT CUSHION ASSEMBLY RH

(a) Engage the rear hook of the rear seat cushion assembly RH to the rear seatback assembly.





(b) Engage the 2 front hooks of the rear seat cushion assembly RH to the vehicle body.

(c) Confirm that the seat cushion is firmly installed.

NOTICE:
When installing the rear seat cushion assembly RH, make sure the seat belt buckle is not under the seat cushion.

4. INSTALL REAR SEAT CUSHION ASSEMBLY LH

(a) Engage the rear hook of the rear seat cushion assembly LH to the rear seatback assembly.





(b) Engage the 2 front hooks of the rear seat cushion assembly LH to the vehicle body.

(c) Confirm that the seat cushion is firmly installed.

NOTICE:
When installing the rear seat cushion assembly LH, make sure the seat belt buckle is not under the seat cushion.

5. INSTALL PACKAGE TRAY TRIM GARNISH RH

(a) Engage the 2 claws and clip to install the package trim garnish RH.





6. INSTALL PACKAGE TRAY TRIM GARNISH LH

(a) Engage the 2 claws and clip to install the package trim garnish LH.





7. CLOSE METALTOP ROOF Installation