Removal

CRUISE CONTROL: CLUTCH SWITCH: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

3. REMOVE DOOR SCUFF PLATE ASSEMBLY LH Removal

4. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal

5. REMOVE INSTRUMENT SIDE PANEL LH Removal

6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

8. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY Removal

9. REMOVE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)

(a) Disconnect the connectors.

(b) Remove the 2 nuts and bolt, and the main body ECU (cowl side junction block LH).





10. REMOVE CLUTCH SWITCH ASSEMBLY

(a) Disconnect the connector.

(b) Loosen the nut and remove the clutch switch assembly.