Installation

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Engage the grommet.

(b) Engage the guide and pin.





Text in Illustration





(c) Install the rear combination light assembly with the 2 screws.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(d) Connect the connector.





(e) Engage the 3 claws and install the rear light cover.





HINT
Use the same procedure for the lower side and the upper side.

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH Installation

3. INSTALL ROPE HOOK ASSEMBLY (for Front LH) Installation

4. INSTALL ROPE HOOK Installation

5. INSTALL PACKAGE TRAY TRIM SIDE COVER LH Installation

6. INSTALL TONNEAU COVER STOPPER SUB-ASSEMBLY LH Installation

7. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR CUSHION Installation

8. INSTALL LOWER INNER LUGGAGE COMPARTMENT TRIM COVER Installation

9. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER Installation

10. INSTALL SLIDING ROOF GUIDE RAIL STOPPER Installation

11. INSTALL TONNEAU COVER HOOK HOLDER Installation

12. INSTALL TONNEAU COVER ASSEMBLY Installation

13. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER Installation

14. INSTALL ROPE HOOK ASSEMBLY (for Rear Side) Installation

15. INSTALL LUGGAGE DOOR LOCK PROTECTOR Installation

16. INSTALL DECK SIDE TRIM BOX LH Installation

17. INSTALL DECK SIDE TRIM BOX RH Installation

18. INSTALL SPARE WHEEL COVER TRAY ASSEMBLY (w/o Spare Tire) Installation

19. INSTALL SPARE TIRE (w/ Spare Tire)

20. INSTALL SPARE WHEEL CUSHION (w/ Spare Tire) Installation

21. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/o Spare Tire) Installation

22. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Spare Tire) Installation

23. SET LUGGAGE COMPARTMENT DOOR Installation

24. CLOSE METALTOP ROOF Installation

25. INSPECT RETRACTABLE HARDTOP SYSTEM

Operation Check