Computers and Control Systems: Service Precautions

2GR-FSE ENGINE CONTROL: SFI SYSTEM: PRECAUTION

1. INITIALIZATION

NOTICE:
Perform the Registration (VIN registration) when replacing the ECM Programming and Relearning.

HINT
Reset memory or initialization cannot be completed by only disconnecting and reconnecting the cable of the negative (-) battery terminal.

2. FOR USING TECHSTREAM

CAUTION:
Observe the following items for safety reasons:

* Before using the Techstream, read the instruction manual.

* Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.

* When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One is for driving the vehicle, and the other operates the Techstream.

3. DISCONNECTING AND RECONNECTING NEGATIVE BATTERY CABLE





(a) Before performing work on electronic components, disconnect the cable from the negative (-) battery terminal to prevent damage to the electrical system or electrical components.

Text in Illustration





(b) Before disconnecting and reconnecting the battery cable, turn the engine switch off and the headlight switch off. Then loosen the terminal nut completely. Do not damage the cable or terminal.

(c) When the battery cable is disconnected, the clock and radio settings and stored DTCs are cleared. Therefore, before disconnecting the battery cable, make a note of them.