Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: REMOVAL

1. PRECAUTION

NOTICE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE DOOR SCUFF PLATE ASSEMBLY LH Removal

4. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal

5. REMOVE INSTRUMENT SIDE PANEL LH Removal

6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

7. REMOVE VSC OFF SWITCH

(a) Disengage the 2 claws to remove the VSC off switch from the lower instrument panel finish panel sub-assembly.