Installation

2GR-FSE STARTING: ENGINE SWITCH: INSTALLATION

1. INSTALL ENGINE SWITCH

(a) Attach the 2 claws to install the switch.





(b) Connect the switch connector.

2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Multi-display) Installation

3. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Multi-display) Installation

4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

6. INSTALL CONSOLE BOX Installation

7. INSTALL CONSOLE BOX REGISTER ASSEMBLY (w/ Ashtray) Installation

8. INSTALL CONSOLE BOX REGISTER ASSEMBLY (w/o Ashtray) Installation

9. INSTALL REAR ASH RECEPTACLE ASSEMBLY (w/ Ashtray) Installation

10. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Installation

11. INSTALL INSTRUMENT PANEL COIN BOX (w/o Ashtray) Installation

12. INSTALL CONSOLE PANEL SUB-ASSEMBLY Installation

13. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH Installation

14. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH Installation

15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL