Part 3

A760E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION UNIT: DISASSEMBLY - Continued

61. REMOVE REVERSE CLUTCH PISTON SUB-ASSEMBLY

(a) Remove the reverse clutch piston sub-assembly from the reverse clutch drum sub-assembly.





(b) Remove the O-ring from the reverse clutch piston sub-assembly.





(c) Remove the O-ring from the reverse clutch drum sub-assembly.





62. REMOVE DIRECT CLUTCH PISTON SUB-ASSEMBLY

(a) Place SST on the direct clutch piston, and compress the return spring with a press.





SST : 09320-89010

(b) Using SST, remove the snap ring.

SST : 09350-30020

09350-07070

(c) Using 2 screwdrivers, remove the direct clutch piston sub-assembly from the reverse clutch drum sub-assembly.





(d) Remove the No. 2 clutch balancer and direct clutch return spring sub-assembly from the direct clutch piston sub-assembly.





(e) Remove the 2 O-rings from the direct clutch piston sub-assembly.





63. INSPECT DIRECT CLUTCH RETURN SPRING SUB-ASSEMBLY Transmission Unit

64. REMOVE NO. 3 BRAKE SNAP RING

(a) Using a screwdriver, remove the No. 3 brake snap ring from the transmission case.





65. REMOVE NO. 3 BRAKE DISC

(a) Remove the No. 3 brake flange, cushion plate, 4 No. 3 brake discs and 4 No. 3 brake plates from the transmission case.





Text in Illustration





66. INSPECT NO. 3 BRAKE DISC Transmission Unit

67. REMOVE 2ND BRAKE PISTON HOLE SNAP RING

(a) Using SST, remove the snap ring.





SST : 09350-30020

09350-07060

68. REMOVE ONE-WAY CLUTCH ASSEMBLY

(a) Remove the one-way clutch assembly and No. 1 planetary carrier thrust washer from the transmission case.





69. REMOVE 2ND BRAKE CYLINDER

(a) Remove the 2nd brake cylinder from the transmission case.





70. REMOVE 2ND BRAKE PISTON

(a) Using SST, a screwdriver and a press, remove the 2nd brake piston hole snap ring.





SST : 09351-40010

09351-04060

09351-04070

(b) Remove the No. 3 brake piston return spring sub-assembly.

(c) Hold the 2nd brake piston and apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the 2nd brake cylinder to remove the 2nd brake piston.





(d) Remove the 2 O-rings from the 2nd brake piston.





Text in Illustration





71. INSPECT NO. 3 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY Transmission Unit

72. REMOVE FRONT PLANETARY GEAR ASSEMBLY

(a) Remove the front planetary gear assembly and one-way clutch inner race from the transmission case.





(b) Remove the thrust needle roller bearing, No. 3 thrust bearing race and No. 2 planetary carrier thrust washer from the transmission case.





73. INSPECT FRONT PLANETARY GEAR ASSEMBLY Transmission Unit

74. INSPECT ONE-WAY CLUTCH ASSEMBLY Transmission Unit

75. REMOVE FRONT PLANETARY RING GEAR

(a) Remove the front planetary ring gear from the transmission case.





76. REMOVE CENTER PLANETARY RING GEAR

(a) Using a screwdriver, remove the snap ring.





(b) Remove the center planetary ring gear and front planetary ring thrust flange from the front planetary ring gear.





(c) Remove the thrust needle roller bearing from the front planetary ring thrust flange.

77. REMOVE NO. 1 BRAKE DISC

(a) Remove the No. 1 brake flange, 3 No. 1 brake discs and 3 No. 1 brake plates from the transmission case.





Text in Illustration





78. INSPECT NO. 1 BRAKE DISC Transmission Unit

79. REMOVE BRAKE PISTON RETURN SPRING SNAP RING

(a) Using a screwdriver, remove the brake piston return spring snap ring from the transmission case.





80. REMOVE BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

(a) Remove the brake piston return spring, No. 1 brake piston and No. 1 brake cylinder from the transmission case.





81. INSPECT BRAKE PISTON RETURN SPRING SUB-ASSEMBLY Transmission Unit

82. REMOVE NO. 1 BRAKE PISTON

(a) Hold the No. 1 brake cylinder and apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the No. 1 brake cylinder to remove the No. 1 brake piston.





HINT
If the piston does not pop out with compressed air, lift the piston out with needle-nose pliers.

(b) Remove the 2 O-rings from the No. 1 brake piston.

83. REMOVE NO. 2 BRAKE DISC

(a) Using a screwdriver, remove the No. 2 brake snap ring from the transmission case.





(b) Remove the 2 No. 2 brake flanges, brake piston return spring, 4 No. 2 brake discs and 3 No. 2 brake plates from the transmission case.





Text in Illustration





84. INSPECT NO. 2 BRAKE DISC Transmission Unit

85. INSPECT NO. 2 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY Transmission Unit

86. REMOVE NO. 2 BRAKE PISTON

(a) Hold the No. 2 brake piston and apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the transmission case to remove the No. 2 brake piston and No. 2 brake cylinder.





HINT
If the piston does not pop out with compressed air, lift the piston out with needle-nose pliers.

(b) Remove the piston from the cylinder.

(c) Remove the 2 O-rings from the No. 2 brake piston.

87. REMOVE CENTER PLANETARY GEAR ASSEMBLY

(a) Remove the center planetary gear assembly, planetary sun gear and No. 4 thrust bearing race from the transmission case.





88. INSPECT CENTER PLANETARY GEAR ASSEMBLY Transmission Unit

89. REMOVE INTERMEDIATE SHAFT

(a) Using SST, remove the snap ring from the transmission case.





SST : 09350-30020

09350-07060

(b) Remove the intermediate shaft with the No. 3 one-way clutch assembly from the transmission case.





90. INSPECT NO. 3 ONE-WAY CLUTCH ASSEMBLY Transmission Unit

91. REMOVE NO. 3 ONE-WAY CLUTCH ASSEMBLY

(a) Remove the No. 3 one-way clutch assembly and one-way clutch inner race from the intermediate shaft.





92. REMOVE REAR PLANETARY RING GEAR FLANGE SUB-ASSEMBLY

(a) Remove the No. 8 thrust bearing race, thrust needle roller bearing, No. 7 thrust bearing race and planetary ring gear flange from the intermediate shaft.





Text in Illustration





93. INSPECT REAR PLANETARY RING GEAR FLANGE SUB-ASSEMBLY Transmission Unit

94. INSPECT INTERMEDIATE SHAFT Transmission Unit

95. REMOVE BRAKE PLATE STOPPER SPRING

(a) Remove the brake plate stopper spring from the transmission case.





96. REMOVE NO. 4 BRAKE DISC

(a) Remove the sleeve, 4 No. 4 brake plates, 4 No. 4 brake discs and No. 4 brake flange from the transmission case.





Text in Illustration





97. INSPECT NO. 4 BRAKE DISC Transmission Unit

98. REMOVE REAR PLANETARY GEAR ASSEMBLY

(a) Remove the rear planetary gear assembly from the transmission case.





(b) Remove the 2 thrust needle roller bearings from the rear planetary gear assembly.





(c) Remove the No. 9 thrust bearing race from the transmission case.





99. INSPECT REAR PLANETARY GEAR ASSEMBLY Transmission Unit

100. REMOVE 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY

(a) Place SST on the 1st and reverse brake return spring sub-assembly and compress the brake return spring.





SST : 09350-30020

09350-07050

(b) Using SST, remove the 1st and reverse brake return spring shaft snap ring and brake return spring.

SST : 09350-30020

09350-07070

Text in Illustration





101. INSPECT 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY Transmission Unit

102. REMOVE 1ST AND REVERSE BRAKE PISTON

(a) Hold the 1st and reverse brake piston and blow compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) into the transmission case to remove the 1st and reverse brake piston.





HINT
If the piston does not pop out with compressed air, lift the piston out with needle-nose pliers.

(b) Remove the brake apply tube from the piston.

(c) Remove the 1st and reverse brake piston O-ring from the brake piston.

103. REMOVE BRAKE REACTION SLEEVE

(a) Using SST, remove the brake reaction sleeve.





SST : 09350-30020

09350-07080

(b) Remove the 2 O-rings from the brake reaction sleeve.

104. REMOVE NO. 4 BRAKE PISTON

(a) Using SST, remove the No. 4 brake piston.





SST : 09350-30020

09350-07080

(b) Remove the 2 O-rings from the No. 4 brake piston.