B2277
THEFT DETERRENT / KEYLESS ENTRY: SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function): B2277: Detecting Vehicle Submersion
B2277 - Detecting Vehicle Submersion
DESCRIPTION
This DTC is output when the submersion circuit monitor inside the power source control ECU detects that the vehicle is submerged in water.
HINT
When the power source control ECU is replaced with a new one and the negative (-) battery terminal is connected, the power source mode becomes the IG-ON mode. When the battery is removed and reinstalled, the power source mode that was selected when the battery was removed is restored.
INSPECTION PROCEDURE
PROCEDURE
1. CHECK FOR DTC
(a) Clear the DTC Smart Access System With Push-Button Start (for Start Function).
(b) Turn the engine switch on (IG).
(c) After 330 seconds have elapsed, check if the trouble occurs again.
OK:
DTC B2277 is not output.
NG -- REPLACE POWER SOURCE CONTROL ECU
OK -- USE SIMULATION METHOD TO CHECK How To Proceed With Troubleshooting