Part 3

AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION SYSTEM: P0776: Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2)
P0776 - Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2) (Continued)

B -- INSPECT TRANSMISSION VALVE BODY ASSEMBLY

A -- REPLACE SHIFT SOLENOID VALVE SR Disassembly

5. INSPECT SHIFT SOLENOID VALVE SL2

(a) Remove the shift solenoid valve SL2 Disassembly.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

B -- INSPECT TRANSMISSION VALVE BODY ASSEMBLY

A -- REPLACE SHIFT SOLENOID VALVE SL2 Disassembly

6. INSPECT SHIFT SOLENOID VALVE SLT

(a) Remove the shift solenoid valve SLT Disassembly.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

(c) Connect a battery positive (+) lead with a 21 W bulb to terminal 2 and a negative (-) lead to terminal 1 of the solenoid valve connector. Then check that the valve moves and makes an operating sound.

OK:

Valve moves and makes an operating sound.

NG -- REPLACE SHIFT SOLENOID VALVE SLT Disassembly
OK -- Continue to next step.

7. INSPECT TRANSMISSION VALVE BODY ASSEMBLY

(a) Check the transmission valve body assembly Disassembly.

OK:

There are no foreign objects on any valve.

NG -- REPAIR OR REPLACE TRANSMISSION VALVE BODY ASSEMBLY Removal
OK -- Continue to next step.

8. INSPECT SPEED SENSOR TERMINAL (NC3 TERMINAL)

(a) Disconnect the transmission wire connector.

(b) Turn the engine switch on (IG).

(c) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

NG -- CHECK HARNESS AND CONNECTOR (TRANSMISSION WIRE - TCM)
OK -- Continue to next step.

9. INSPECT TRANSMISSION WIRE (SPEED SENSOR NC3)

(a) Disconnect the speed sensor (NC3) connector Removal.

(b) Disconnect the transmission wire connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

NG -- REPAIR OR REPLACE TRANSMISSION WIRE Removal

OK -- REPLACE SPEED SENSOR Removal

10. CHECK HARNESS AND CONNECTOR (TRANSMISSION WIRE - TCM)

(a) Disconnect the transmission wire connector.

(b) Disconnect the TCM connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

11. REPLACE TCM

(a) Replace the TCM Removal.

NEXT -- PERFORM A/T CODE REGISTRATION Registration