Part 2
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION SYSTEM: P2817: Pressure Control Solenoid "H" Performance or Stuck OFF (Shift Solenoid Valve SL5)
P2817 - Pressure Control Solenoid "H" Performance or Stuck OFF (Shift Solenoid Valve SL5) (Continued)
Condition (2)
- When all conditions below are met: Condition (a), (b), (c), (d), (e), (f), (g) and (h)
Condition (a)
Condition (b)
Condition (c)
Condition (d)
Condition (e)
Condition (f)
Condition (g)
Condition (h)
ON malfunction (B)
- When either condition below is met: Condition (1) or (2)
Condition (1)
- When one of the following conditions is met: Condition (a), (b), (c), (d), (e), (f), (g) or (h)
Condition (a)
Condition (b)
Condition (c)
Condition (d)
Condition (e)
Condition (f)
Condition (g)
Condition (h)
Condition (2)
- When all conditions below are met: Condition (a), (b), (c), (d), (e), (f), (g) and (h)
Condition (a)
Condition (b)
Condition (c)
Condition (d)
Condition (e)
Condition (f)
Condition (g)
Condition (h)
TYPICAL MALFUNCTION THRESHOLDS
OFF malfunction
- When one of the following conditions is met: OFF malfunction (A), (B), (C), (D) or (E)
OFF malfunction (A) and (D)
- When either condition below is met: Condition (1) or (2)
Condition (1)
Condition (2)
OFF malfunction (B)
*
OFF malfunction (C)
*
OFF malfunction (E)
*
ON malfunction
- When either condition below is met: ON malfunction (A) or (B)
ON malfunction (A)
- When either condition below is met: Condition (1) or (2)
Condition (1)
Condition (2)
ON malfunction (B)
- When either condition below is met: Condition (1) or (2)
Condition (1)
Condition (2)
INSPECTION PROCEDURE
NOTICE:
Perform the universal trip to clear permanent DTCs Reading and Clearing Diagnostic Trouble Codes.
PROCEDURE
1. CHECK DTC OUTPUT (IN ADDITION TO DTC P2714 AND P2817)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / ECT / Trouble Codes.
(e) Read the DTCs using the Techstream.
Result:
HINT
If any other codes besides P2714 and P2817 are output, perform troubleshooting for those DTCs first.