Gateway ECU Power Source Circuit

AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/o Navigation System without Multi-display): Gateway ECU Power Source Circuit
- Gateway ECU Power Source Circuit

DESCRIPTION

This is the power source circuit to operate the network gateway ECU.

WIRING DIAGRAM

INSPECTION PROCEDURE

PROCEDURE

1. INSPECT NETWORK GATEWAY ECU

(a) Disconnect the network gateway ECU connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table