Disassembly
EXTERIOR PANELS / TRIM: REAR BUMPER: DISASSEMBLY
1. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
Removal
HINT
Use the same procedure for the RH side and LH side.
2. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
Removal
HINT
Use the same procedure for the RH side and LH side.
3. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
for Corner Sensor: Removal
HINT
Use the same procedure for the RH side and LH side.
for Back Sensor: Removal
HINT
Use the same procedure for the RH side and LH side.
4. REMOVE NO. 3 LUGGAGE ROOM WIRE (w/ Intuitive Parking Assist System)
(a) Disengage the 4 connectors.
(b) Disengage the 4 clamps and remove the No. 3 luggage room wire.
5. REMOVE REAR BUMPER PIECE LH
(a) Disengage the 2 claws and remove the rear bumper piece LH.
6. REMOVE REAR BUMPER PIECE RH
HINT
Use the same procedure for the RH side and LH side.
7. REMOVE REFLEX REFLECTOR ASSEMBLY LH
(a) Remove the screw.
(b) Disengage the claw and remove the reflex reflector assembly LH.
8. REMOVE REFLEX REFLECTOR ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side.
9. REMOVE NO. 2 REAR BUMPER SIDE RETAINER LH
(a) Remove the bolt and screw, and No. 2 rear bumper side retainer LH.
10. REMOVE NO. 2 REAR BUMPER SIDE RETAINER RH
HINT
Use the same procedure for the RH side and LH side.
11. REMOVE REAR BUMPER EXTENSION LH
(a) Remove the 3 bolts and rear bumper extension LH.
12. REMOVE REAR BUMPER EXTENSION RH
HINT
Use the same procedure for the RH side and LH side.
13. REMOVE REAR BUMPER PROTECTOR LH
(a) Remove the rear bumper protector LH.
14. REMOVE REAR BUMPER PROTECTOR RH
(a) Remove the rear bumper protector RH.
15. REMOVE REAR BUMPER LOWER RETAINER LH
(a) Remove the screw and rear bumper lower retainer LH.
16. REMOVE REAR BUMPER LOWER RETAINER RH
HINT
Use the same procedure for the RH side and LH side.
17. REMOVE REAR BUMPER PAD LH
(a) Remove the rear bumper pad LH.
18. REMOVE REAR BUMPER PAD RH
HINT
Use the same procedure for the RH side and LH side.
19. REMOVE REAR BUMPER ENERGY ABSORBER
(a) Remove the rear bumper energy absorber.
20. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY
(a) Remove the 8 bolts and rear bumper reinforcement sub-assembly.
21. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT LH
(a) Remove the 2 screws, clip and No. 1 rear bumper side support LH.
22. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT RH
HINT
Use the same procedure for the RH side and LH side.
23. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT LH
(a) Remove the 2 screws and No. 2 rear bumper side support LH.
24. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT RH
HINT
Use the same procedure for the RH side and LH side.
25. REMOVE UPPER REAR BUMPER RETAINER LH
(a) Remove the 2 screws and upper rear bumper retainer LH.
26. REMOVE UPPER REAR BUMPER RETAINER RH
HINT
Use the same procedure for the RH side and LH side.