Reassembly

EXTERIOR PANELS / TRIM: REAR BUMPER: REASSEMBLY

1. INSTALL UPPER REAR BUMPER RETAINER LH

(a) Install the upper rear bumper retainer LH with the 2 screws.





2. INSTALL UPPER REAR BUMPER RETAINER RH

HINT
Use the same procedure for the RH side and LH side.

3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH

(a) Install the No. 2 rear bumper side support LH with the 2 screws.





4. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH

HINT
Use the same procedure for the RH side and LH side.

5. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT LH

(a) Install the No. 1 rear bumper side support LH with the 2 screws and clip.





6. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT RH

HINT
Use the same procedure for the RH side and LH side.

7. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

(a) Install the rear bumper reinforcement sub-assembly with the 8 bolts.





Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

8. INSTALL REAR BUMPER ENERGY ABSORBER

(a) Install the rear bumper energy absorber.





9. INSTALL REAR BUMPER PAD LH

(a) Install a new rear bumper pad LH.





HINT
Stick the new rear bumper pad LH on the line marked on the rear bumper assembly.

10. INSTALL REAR BUMPER PAD RH

HINT
Use the same procedure for the RH side and LH side.

11. INSTALL REAR BUMPER LOWER RETAINER LH

(a) Install the rear bumper lower retainer LH with the screw.





12. INSTALL REAR BUMPER LOWER RETAINER RH

HINT
Use the same procedure for the RH side and LH side.

13. INSTALL REAR BUMPER PROTECTOR LH

(a) Install the rear bumper protector LH.

14. INSTALL REAR BUMPER PROTECTOR RH

(a) Install the rear bumper protector RH.

15. INSTALL REAR BUMPER EXTENSION LH

(a) Install the rear bumper extension LH with the 3 bolts.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

16. INSTALL REAR BUMPER EXTENSION RH

HINT
Use the same procedure for the RH side and LH side.

17. INSTALL NO. 2 REAR BUMPER SIDE RETAINER LH

(a) Install the No. 2 rear bumper side retainer LH with the bolt and screw.





bolt - Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

18. INSTALL NO. 2 REAR BUMPER SIDE RETAINER RH

HINT
Use the same procedure for the RH side and LH side.

19. INSTALL REFLEX REFLECTOR ASSEMBLY LH

(a) Engage the claw and install the reflex reflector assembly LH.





(b) Install the screw.

20. INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

21. INSTALL REAR BUMPER PIECE LH

(a) Engage the 2 claws and install the rear bumper piece LH.





22. INSTALL REAR BUMPER PIECE RH

HINT
Use the same procedure for the RH side and LH side.

23. INSTALL NO. 3 LUGGAGE ROOM WIRE (w/ Intuitive Parking Assist System)

(a) Engage the 4 clamps and install the No. 3 luggage room wire.





(b) Engage the 4 connectors.

24. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

for Corner Sensor: Installation

HINT
Use the same procedure for the RH side and LH side.

for Back Sensor: Installation

HINT
Use the same procedure for the RH side and LH side.

25. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Installation

HINT
Use the same procedure for the RH side and LH side.

26. INSTALL NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Installation

HINT
Use the same procedure for the RH side and LH side.