System Description

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: SYSTEM DESCRIPTION

1. FUNCTION OF MAIN COMPONENTS





2. SYSTEM DESCRIPTION

(a) The power door lock control system locks/unlocks all doors.

* The door control switch of the master switch uses the BEAN line to send lock/unlock request signals to the main body ECU RH (cowl side junction block RH).

* The driver door key cylinder lock/unlock request signals are sent to the main body ECU RH (cowl side junction block RH) from the front door lock LH.

* The passenger door control switch lock/unlock request signals are sent to the main body ECU RH (cowl side junction block RH).

* The main body ECU RH (cowl side junction block RH) receives the request signals and locks/unlocks each door.

The door control system has the following functions:





*1: The default setting for models without the occupant classification system is off.

*2: The default setting for models with the occupant classification system is off.

*3: This function is set through the customize function, as it is off by default.