Removal

SEAT: FRONT SEAT ASSEMBLY: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing Service Precautions.

NOTICE:
When replacing the occupant classification ECU, perform registration Registration.

2. REMOVE FRONT SEAT HEADREST ASSEMBLY

3. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER

(a) Operate the power seat switch knob and move the seat to the rearmost position.

(b) Disengage the 2 claws and remove the front outer seat track bracket cover.





4. REMOVE FRONT INNER SEAT TRACK BRACKET COVER

(a) Disengage the 2 claws and remove the front inner seat track bracket cover.





5. REMOVE REAR OUTER SEAT TRACK BRACKET COVER

(a) Operate the power seat switch knob and move the seat to the foremost position.

(b) Disengage the 2 claws and remove the rear outer seat track bracket cover.





6. REMOVE REAR INNER SEAT TRACK BRACKET COVER

(a) Disengage the 2 claws and remove the rear inner seat track bracket cover.





7. REMOVE FRONT SEAT ASSEMBLY

(a) Remove the 2 bolts on the rear side of the seat.





(b) Operate the power seat switch knob and move the seat to the rearmost position.

(c) Remove the 2 bolts on the front side of the seat.





(d) Operate the power seat switch knob and move the seat to the center position. Also, operate the power seat switch knob and move the seatback to the upright position.

(e) Disconnect the cable from the negative (-) battery terminal.

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

(f) Disconnect the connectors under the seat.

(g) Remove the front seat assembly.

NOTICE:
Be careful not to damage the vehicle body.