Installation

2UR-GSE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

1. INSTALL V-RIBBED BELT

(a) Install the V-ribbed belt as shown in the illustration.





(b) Rotate the V-ribbed belt tensioner pulley counterclockwise, and then remove the bar.

NOTICE:
Check that the drive belt is properly set to each pulley.

(c) Check that the belt is properly positioned on each pulley.





(d) Start the engine and check that the belt turns smoothly and no abnormal noise occurs.

2. INSTALL RADIATOR RESERVE TANK ASSEMBLY

(a) Install the radiator reserve tank assembly with the 2 bolts.





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

3. INSTALL NO. 1 AIR CLEANER INLET Installation

4. INSTALL COOL AIR INTAKE DUCT SEAL Installation