Accelerator Pedal: Testing and Inspection

2UR-GSE ENGINE CONTROL: ACCELERATOR PEDAL: ON-VEHICLE INSPECTION

1. INSPECT ACCELERATOR PEDAL

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream ON.

(d) Enter the following menus: Powertrain / Engine / Data List / Accelerator Position No. 1 and accelerator Position No. 2.

(e) Read the value displayed on the Techstream.

Standard Voltage:





Standard Voltage:





If the result is not as specified, check the accelerator pedal, wire harness or ECM.