Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: INSTALLATION

1. INSTALL NAVIGATION ECU

(a) Install the navigation ECU with the 4 screws.





(b) Connect each connector to install the harness.





(c) Engage the clamp.

2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY Installation

3. INSTALL NO. 2 RADIO BRACKET Installation

4. INSTALL NO. 1 RADIO BRACKET Installation

5. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY Installation

6. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

8. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Installation

9. INSTALL INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray) Installation

10. INSTALL CONSOLE PANEL SUB-ASSEMBLY Installation

11. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH Installation

12. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

14. INSERT MAP DISC

(a) Remove the clock assembly.





(b) Turn the engine switch on (ACC).

(c) Insert the map disc.

(d) Check that the wire harness is in the position shown in the illustration.





Text in Illustration





(e) Engage the 2 craws and install the clock assembly.





15. ADJUST CLOCK