Installation

SEAT BELT: OCCUPANT DETECTION SENSOR: INSTALLATION

1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD

(a) Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 16 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

2. INSTALL FRONT SEAT CUSHION COVER WITH PAD Reassembly

3. INSTALL POWER SEAT SWITCH

HINT
Use the same procedure described for the LH side Reassembly.

4. INSTALL FRONT SEAT CUSHION INNER SHIELD

HINT
Use the same procedure described for the LH side Reassembly.

5. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY

HINT
Use the same procedure described for the LH side Reassembly.

6. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

HINT
Use the same procedure described for the LH side Reassembly.

7. INSTALL RECLINING POWER SEAT SWITCH KNOB

HINT
Use the same procedure described for the LH side Reassembly.

8. INSTALL FRONT SEAT INNER BELT ASSEMBLY

HINT
Use the same procedure described for the LH side Installation.

9. INSTALL FRONT SEAT ASSEMBLY

Installation

HINT
Use the same procedure described for the LH side.