Disassembly

STEERING COLUMN: STEERING COLUMN ASSEMBLY: DISASSEMBLY

1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY

(a) Using a center punch, mark the center of the 2 tapered-head bolts.

(b) Using a 3 to 4 mm (0.118 to 0.157 in.) diameter drill bit, drill a hole in the each tapered-head bolt.

(c) Using a screw extractor, remove the each tapered-head bolt and steering lock actuator assembly from the steering column assembly.





2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU Removal