Removal

REAR SUSPENSION: REAR STABILIZER BAR: REMOVAL

1. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR Removal

2. REMOVE NO. 1 DIFFERENTIAL SUPPORT PROTECTOR

HINT
Perform the same procedure as the No. 2 differential support protector.

3. LOOSEN BOLT (for LH Side)

(a) Loosen the bolt.





NOTICE:
* Do not remove the bolt.
* Turn the bolt while holding the nut.

4. LOOSEN BOLT (for RH Side)

HINT
Perform the same procedure as the LH side.

5. REMOVE REAR STABILIZER LINK ASSEMBLY LH

(a) Remove the nut, and separate the rear stabilizer link assembly LH from the rear stabilizer bar.





HINT
If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

(b) Remove the nut, bolt, and the stabilizer link assembly LH.





6. REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT
Use the same procedure as the LH side.

7. REMOVE REAR STABILIZER BAR

(a) Remove the 4 bolts, 2 stabilizer brackets, 2 rear stabilizer bushings, and rear stabilizer bar.