Part 3
AA80E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION SYSTEM: P0796: Pressure Control Solenoid "C" Performance (Shift Solenoid Valve SL3)
P0796 - Pressure Control Solenoid "C" Performance (Shift Solenoid Valve SL3)
Condition (1)
- When one of the following conditions is met: Condition (a), (b), (c), (d), (e), (f), (g) or (h)
Condition (a)
Condition (b)
Condition (c)
Condition (d)
Condition (e)
Condition (f)
Condition (g)
Condition (h)
Condition (2)
- When all conditions below are met: Condition (a), (b), (c), (d), (e), (f), (g) and (h)
Condition (a)
Condition (b)
Condition (c)
Condition (d)
Condition (e)
Condition (f)
Condition (g)
Condition (h)
ON malfunction (E)
- When either condition below is met: Condition (1) or (2)
Condition (1)
- When one of the following conditions is met: Condition (a), (b), (c), (d), (e), (f), (g) or (h)
Condition (a)
Condition (b)
Condition (c)
Condition (d)
Condition (e)
Condition (f)
Condition (g)
Condition (h)
Condition (2)
- When all conditions below are met: Condition (a), (b), (c), (d), (e), (f), (g) and (h)
Condition (a)
Condition (b)
Condition (c)
Condition (d)
Condition (e)
Condition (f)
Condition (g)
Condition (h)
ON malfunction (F)
- When either condition below is met: Condition (1) or (2)
Condition (1)
- When one of the following conditions is met: Condition (a), (b), (c), (d), (e), (f), (g) or (h)
Condition (a)
Condition (b)
Condition (c)
Condition (d)
Condition (e)
Condition (f)
Condition (g)
Condition (h)
Condition (2)
- When all conditions below are met: Condition (a), (b), (c), (d), (e), (f), (g) and (h)
Condition (a)
Condition (b)
Condition (c)
Condition (d)
Condition (e)
Condition (f)
Condition (g)
Condition (h)
TYPICAL MALFUNCTION THRESHOLDS
OFF malfunction
- When one of the following conditions is met: OFF malfunction (A), (B), (C), (D) or (E)
OFF malfunction (A)
- When either condition below is met: Condition (1) or (2)
Condition (1)
Condition (2)
OFF malfunction (B) and (D)
*
OFF malfunction (C)
*
OFF malfunction (E)
*
ON malfunction
- When one of the following conditions is met: ON malfunction (A), (B), (C), (D), (E) or (F)
2 detections are necessary per driving cycle:
1st detection: temporary flag on
2nd detection: pending fault code on
ON malfunction (A), (B) and (C)
- When either condition below is met: Condition (1) or (2)
Condition (1)
Condition (2)
ON malfunction (D), (E) and (F)
- When either condition below is met: Condition (1) or (2)
Condition (1)
Condition (2)
INSPECTION PROCEDURE
NOTICE:
Perform the universal trip to clear permanent DTCs AA80E Automatic Transmission System.
PROCEDURE
1. CHECK DTC OUTPUT (IN ADDITION TO DTC P0771, P0796, P2714 AND P2808)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / ECT / Trouble Codes.
(e) Read the DTCs using the Techstream.
Result:
HINT
If any other codes besides P0771, P0796, P2714 and P2808 are output, perform troubleshooting for those DTCs first.
B -- CLEAR DTC AND PERFORM STALL SPEED TEST
C -- CLEAR DTC AND PERFORM STALL SPEED TEST
D -- GO TO DTC CHART Automatic Transmission System - AA80E
A -- Continue to next step.